این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Iranian Journal of Chemical Engineering، جلد ۲۲، شماره ۲، صفحات ۳-۱۱
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Valorization of Plant Fiber for the Reinforcement of Thermoplastic Matrix
چکیده انگلیسی مقاله Plant fiber composites are currently experiencing strong development, particularly due to the growing interest in them in the automotive industry. These fibers are an excellent alternative to glass fibers from the environmental point of view due to their biodegradability and their much more neutral combustibility in terms of the release of harmful gases or solid residues. However, the incorporation of cellulosic materials into the thermoplastic matrix affects a large number of properties. Many factors, such as the nature and rate of the incorporated filler, can influence the properties of the composites. The present work involves studying the effect of the particle size of a natural fiber on the properties of a polymer matrix. The plant fibers used are DISS fibers ground into a powder with a particle size of less than 63µm. Different formulations based on HDPE/Diss were prepared with different amounts of the filler (10%, 20% and 30%). The HDPE/Diss composites were first processed using a calender, then molded into samples of various shapes with a thickness of 3 mm by compression at 190 °C. These were characterized by various techniques: physical tests, mechanical tests, rheological and morphological tests.
کلیدواژه‌های انگلیسی مقاله Plant fiber,Matrix,Thermoplastic,Reinforcement
نویسندگان مقاله Badrina Dairi |
Department of Process Engineering, Faculty of Technology, Skikda University 20 August – 1955 – Algeria Department of Process Engineering, Faculty of Technology, Laboratory of Advanced Polymer Materials (LMPA), Abderrahmane MIRA University, Béjaïa 06000, Algeria

Nadira Bellili |
Department of Process Engineering, Faculty of Technology, Skikda University 20 August – 1955 – Algeria Department of Process Engineering, Faculty of Technology, Laboratory of Advanced Polymer Materials (LMPA), Abderrahmane MIRA University, Béjaïa 06000, Algeria

Nassima Dairi |
Department of Industrial Chemical Technology. Institute of Technology. Akli Mohand Oulhadj University (UAMOB), Bouira. Algeria Department of Macromolecular Chemistry, Faculty of Chemistry, Materials Polymer Laboratory, University of Sciences and Technology Houari Boumediene USTHB, B.P. 32 El-Alia, 16111 Algiers, Algeria

Achouak Lebiod |
Department of Process Engineering, Faculty of Technology, Skikda University 20 August – 1955 – Algeria

نشانی اینترنتی https://www.ijche.com/article_225350_3b874344baecbbc7d83ee0d158476900.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات