|
|
Journal of Applied Fluid Mechanics، جلد ۱۰، شماره (Special Issue)، صفحات ۱-۵
|
|
|
| عنوان فارسی |
|
|
| چکیده فارسی مقاله |
|
|
| کلیدواژه‌های فارسی مقاله |
|
|
| عنوان انگلیسی |
Experimental Analysis of Four Stroke Diesel Engine by using Carbon Nano Tubes Based Nano Fluids as a Coolant |
|
| چکیده انگلیسی مقاله |
The exciting coolants have reached their limitations of heat dissipating capacity. It is studied from the literature review that nanofluids are the novel and alternate heat transfer medium with significant temperature-dependent thermal conductivity even at very low particle concentrations than the conventional heat transfer fluids. In this experimental investigation, the multi walled carbon nanotube (MWCNT) water is used as a coolant in four stroke single cylinder diesel engine to assess the performance of the engine. The MWCNT/ water nanofluid is prepared with surfactant to get the stable suspension of nanofluid. Tests are performed by constant the mass flow rate 330 LPH of coolant nanofluids and by changing the load and by keeping the speed constant. It is found that the brake thermal efficiency increases by 10 to 15%, exhaust temperature decreases by 8 to 10% decreases and the specific fuel consumption decreases when compared to water as a coolant at the same testing condition. |
|
| کلیدواژه‌های انگلیسی مقاله |
Nanofluid,
Thermal conductivity,
Coolant,
Mass flow,
Brake thermal efficiency |
|
| نویسندگان مقاله |
Muruganandam M |
Saveetha Engineering College
P. C. Mukesh Kumar |
University College of Engineering
|
|
| نشانی اینترنتی |
https://www.jafmonline.net/article_1968_7e988b3c806d593a3b69930cf42eaa23.pdf |
| فایل مقاله |
فایلی برای مقاله ذخیره نشده است |
| کد مقاله (doi) |
|
| زبان مقاله منتشر شده |
en |
| موضوعات مقاله منتشر شده |
|
| نوع مقاله منتشر شده |
|
|
|
|
برگشت به:
صفحه اول پایگاه |
نسخه مرتبط |
نشریه مرتبط |
فهرست نشریات
|