|
|
Iranian Journal of Chemistry and Chemical Engineering، جلد ۴۱، شماره ۱۲، صفحات ۴۱۵۱-۴۱۶۴
|
|
|
| عنوان فارسی |
|
|
| چکیده فارسی مقاله |
|
|
| کلیدواژه‌های فارسی مقاله |
|
|
| عنوان انگلیسی |
Synthesis and Application of Hydrogels for Oil-Water Separation |
|
| چکیده انگلیسی مقاله |
A cotton-based hydrogel nanocomposite was effectively arranged through free radical graft co-polymerization of a combination of Acrylic Acid (AA), acrylonitrile (AN), and sodium acrylate (NaA) onto the texture pursued by the addition of Ag nanoparticles. Ammonium persulfate (APS) and potassium persulfate (KPS) were utilized as initiators within sight of a crosslinker methylene bisacrylamide (MBA). These samples are characterized by Fourier Transform IinfraRed (FT-IR), and X-Ray Diffraction (XRD) to affirm the hydrogel nanocomposite structure. At first, the influencing factors onto graft polymerization were efficiently enhanced to accomplish a hydrogel with a swelling limit as high as expected under the circumstances. The came about nanocomposite shows overly hydrophilic and superhydrophobic properties. In this manner, the grafted texture, specifically from oil/water, blends separated water with high separation productivity. The impacts of channel type, level of covered hydrogel on cotton, nearness of Ag nanoparticles, extricated oil type, and temperature effect were studied on the hydrogel. Nanocomposite on the partition effectiveness of channels was additionally examined. The as-prepared materials were super hydrophilic and superoleophobic in air and submerged in water. Diesel oil and vegetable oil were used selectively at 10% and 20% volume in water. The separation efficiencies for each were observed on different samples, with and without Ag nanoparticles. The materials can isolate the scope of various oil/water blends (counting immiscible oil/water blends and surfactant-balanced out emulsions) with >97% separation efficiency. Effect of poly AN-CO-NaA and poly AN-co-AA ratios the samples show the same nature, their weight increases with time. The rates were different owing to the monomer ratios. Hence the more hydrophilic groups present, the greater the absorption rate, which shows the characteristics of this poly AN-co-AA grafted hydrogel. Sodium acrylate at different proportions in poly AN-co-NaA was tested, and it can be deduced that hydrophilicity increased with greater proportions of the sodium acrylate. Along these lines, the straightforward and effortless technique has superb potential in various applications such as industrial oil-polluted wastewater and oil spillage clean-up. |
|
| کلیدواژه‌های انگلیسی مقاله |
Oil-water,Nanocomposite,Hydrogel,Hydrophilic,Hydrophobic,Diesel |
|
| نویسندگان مقاله |
Saud Hashmi |
Polymer and Petrochemical Engineering Department, NED University of Engineering & Technology, Karachi, Sindh, PAKISTAN
Asim Mushtaq |
Polymer and Petrochemical Engineering Department, NED University of Engineering & Technology, Karachi, Sindh, PAKISTAN
Rafiq Ahmed |
Polymer and Petrochemical Engineering Department, NED University of Engineering & Technology, Karachi, Sindh, PAKISTAN
Raza Muhammad Khan |
Polymer and Petrochemical Engineering Department, NED University of Engineering & Technology, Karachi, Sindh, PAKISTAN
Zaeem Uddin Ali |
Chemical Engineering Department, NED University of Engineering & Technology, Karachi, Sindh, PAKISTAN
|
|
| نشانی اینترنتی |
https://ijcce.ac.ir/article_249474_38e6ca456060f19c125109aee5b9f855.pdf |
| فایل مقاله |
فایلی برای مقاله ذخیره نشده است |
| کد مقاله (doi) |
|
| زبان مقاله منتشر شده |
en |
| موضوعات مقاله منتشر شده |
|
| نوع مقاله منتشر شده |
|
|
|
|
برگشت به:
صفحه اول پایگاه |
نسخه مرتبط |
نشریه مرتبط |
فهرست نشریات
|