|
|
International Journal of Engineering، جلد ۳۴، شماره ۱۰، صفحات ۲۲۱۳-۲۲۱۸
|
|
|
| عنوان فارسی |
|
|
| چکیده فارسی مقاله |
|
|
| کلیدواژه‌های فارسی مقاله |
|
|
| عنوان انگلیسی |
FE analysis of single-lap adhesive joints with tapered adherends |
|
| چکیده انگلیسی مقاله |
Adhesive joints are becoming increasingly popular in various industrial sectors. However, in spite of numerous recent studies in literature, the design phase of the adhesive joint is still challenging. The main issue in the design phase is the determination of the stress distribution in the adhesive layer under external mechanical loads. In the present study, a classical adhesive joint is analysed in comparison to its modified geometric configuration (i.e. tapered) aimed at reducing the magnitude of stress peaks. In particular, a single-lap joint with steel adherends bonded with a commercial epoxy adhesive is analysed. A 3D FE analysis is conducted to determine the distribution of normal and shear stresses in the mid-plane of the adhesive layer. The results obtained from the present study show that the inclusion of a small taper angle (i.e. 5°) leads to a remarkable reduction of normal stresses (up to 30%) compared to the classical configuration. It is observed that the further increase of the taper angle (up to 15°) does not lead to significant reductions of the stress peaks. The trend in shear stresses, on the other hand, is in contrast: an increase in the taper angle leads to an increase in the shear peaks. The method of tapering the adherends is effective in reducing the normal stresses, which are responsible for triggering the failure in the adhesive joint. |
|
| کلیدواژه‌های انگلیسی مقاله |
Tensile load,Joint,Steel steel |
|
| نویسندگان مقاله |
F. Marchione |
Dipartimento di Ingegneria Civile, Edile e Architettura (DICEA), Università Politecnica delle Marche, via B. Bianche, Ancona, Italy
|
|
| نشانی اینترنتی |
https://www.ije.ir/article_133040_efd1c8d390244dc838f72a1745ad1a4c.pdf |
| فایل مقاله |
فایلی برای مقاله ذخیره نشده است |
| کد مقاله (doi) |
|
| زبان مقاله منتشر شده |
en |
| موضوعات مقاله منتشر شده |
|
| نوع مقاله منتشر شده |
|
|
|
|
برگشت به:
صفحه اول پایگاه |
نسخه مرتبط |
نشریه مرتبط |
فهرست نشریات
|