این سایت در حال حاضر پشتیبانی نمی شود و امکان دارد داده های نشریات بروز نباشند
Tanaffos، جلد ۱۳، شماره ۳، صفحات ۳۸-۴۵
عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله
عنوان انگلیسی Improved Method for Analysis of Airborne Asbestos Fibers Using Phase Contrast Microscopy and FTIR Spectrometry
چکیده انگلیسی مقاله Background: In recent years, some studies have tried to improve Phase Contrast Microscopy (PCM) for counting asbestos fibers. Due to the lack of a universally accepted alternative method, this study aimed to improve PCM for better counting of asbestos fibers. Materials and Methods: Confirmed asbestos standards were applied using a dust generator for sampling. Sampling from the dust generator was carried out according to the Occupational Safety and Health Administration (OSHA) ID160 method and 95 samples with diverse densities were prepared to be counted using conventional and modern PCM. All samples were counted single blindly by a co-author of this study and the obtained data were analyzed by paired ttest, correlation coefficient and Bland-Altman analysis. Duplicate samples were prepared for qualitative analysis by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and X ray. Results: Asbestos densities on filters were in the range of less than 100 to 600 fibers/mm2. Statistically, significant differences were observed for the count density of the 95 samples counted by the two phase contrast microscopes (p <0.001). Nikon microscope demonstrated higher counts compared to conventional microscope and had a lower coefficient of variation. Samples were analyzed qualitatively using FT-IR and SEM, and the presence of asbestos fibers was confirmed. Conclusion: The improved PCM and FT-IR methods presented in this study demonstrated more precise and accurate determination of personal exposure to airborne asbestos fibers and subsequent risk assessment.
کلیدواژه‌های انگلیسی مقاله Phase contrast microscopy,Asbestos fibers,FT-IR Spectroscopy,Scanning electron microscopy
نویسندگان مقاله Mansour R. Azari |
Safety Promotion and Injury Prevention Research Center, Shahid Beheshti University of Medical Sciences, Tehran, Iran,

Asil Yazdian |
Department of Occupational Hygiene, College of Public Health, Shahid Beheshti University of Medical Sciences, Tehran, Iran,

Rezvan Zendehdel |
Department of Occupational Hygiene, College of Public Health, Shahid Beheshti University of Medical Sciences, Tehran, Iran,

Hamid Souri |
Safety Promotion and Injury Prevention Research Center, Shahid Beheshti University of Medical Sciences, Tehran, Iran,

Soheila Khodakarim |
Department of Occupational Hygiene, College of Public Health, Shahid Beheshti University of Medical Sciences, Tehran, Iran

Habibalalah Peirovi |
Medical Nanotechnology & Tissue Engineering Research Center, Shahid Beheshti University of Medical Sciences, Tehran, Iran.

Davod Panahi |
Department of Occupational Hygiene, College of Public Health, Shahid Beheshti University of Medical Sciences, Tehran, Iran,

Marzieh Kazempour |
Department of Occupational Hygiene, College of Public Health, Shahid Beheshti University of Medical Sciences, Tehran, Iran,

نشانی اینترنتی https://www.tanaffosjournal.ir/article_240966_80fa9d5f73ac62330caa0c76330feb93.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات