مهندسی عمران امیرکبیر، جلد ۵۲، شماره ۱۱، صفحات ۲۸۳۱-۲۸۴۶

عنوان فارسی بررسی آزمایشگاهی اثر تثبیت سیمانی فصل مشترک خاک و ژئوتکستایل و ضخامت آن در مقاومت بیرون کشیدگی
چکیده فارسی مقاله یکی از مهمترین پارامترهای تحلیل و طراحی سیستم‌های خاک مسلح، مشخصات مکانیکی فصل مشترک بین خاک و مسلح کننده است. مشخصات مکانیکی فصل مشترک، تعیین کننده طول مهاری مسلح کننده در این سیستم‌ها است. در بسیاری از موارد، بدلیل عدم امکان تامین طول مهاری مورد نیاز، استفاده از خاک مسلح با محدودیت روبرو می‌شود. تقویت مشخصات مکانیکی فصل مشترک خاک و مسلح کننده، می‌تواند دامنه کاربرد این روش تسلیح خاک را گسترده‌تر نماید. در این تحقیق، اثر ایجاد لایه سیمانی در فصل مشترک مسلح کننده و ماسه بعنوان روشی برای تقویت مقاومت بیرون کشیدگی مسلح کننده و کاهش طول مهاری مورد نیاز در طراحی‌ها، بصورت آزمایشگاهی بررسی شده است. با توجه به اینکه ایجاد لایه سیمانی باعث افزایش ضخامت مسلح کننده شد، تاثیر افزایش ضخامت مسلح کننده در مقاومت بیرون کشیدگی آن از خاک نیز بررسی شد. آزمایش‌ها در دستگاه مخصوص بیرون کشیدن مسلح کننده از خاک صورت گرفت. در این آزمایش‌ها، با قرار دادن لایه‌های ماسه در هر رویه مسلح کننده اشباع به همراه 1/5 گرم بر سانتی‌متر مربع سیمان و عمل آوری آن، دو لایه سیمانی در هر دو طرف مسلح کننده ایجاد گردید. نمونه‌های مسلح کننده با ضخامت‌های مختلف آزمایش شده و نتایج مقاومت بیرون کشیدگی آنها مقایسه گردید. نتایج این بررسی‌ها نشان داد که تثبیت سیمانی مسلح کننده‌ها باعث افزایش مقاومت بیرون کشیدگی آنها می‌شود. همچنین در مسلح کننده‌های مشابه، افزایش ضخامت مسلح کننده باعث افزایش مقاومت بیرون کشیدگی آنها می‌شود.
کلیدواژه‌های فارسی مقاله خاک مسلح، مقاومت بیرون کشیدگی، ژئوتکستایل، تثبیت سیمانی، فصل مشترک خاک و ژئو تکستایل،

عنوان انگلیسی Laboratory Investigation of the Effect of the Cement Treatment of the Interface and the Thicknesses of Reinforcement on its Pull-out Capacity
چکیده انگلیسی مقاله Mechanical specification of the interface of soil and reinforcement is one of the most important parameters of the design and construction of reinforced soil systems. Anchorage length of the reinforcement is determined based on the soil-reinforcement interface parameters. Required long anchorage lengths restricts the application of reinforced soil systems. Improving the mechanical parameters of the soil-reinforcement interface could be used to develop the applications of reinforced soil structures in projects with limited space. In this research, the cement treatment of the interface of the soil and reinforcement was employed to improve the pull-out capacity of the reinforcement and consequently to reduce the anchorage length. The effect of the cement treatment on the pull-out capacity of the reinforcement was studied in the laboratory. Also, the effect of the increased thicknesses of the reinforcements resulted from the cemented layers adhered to the reinforcement surface was investigated. The laboratory tests conducted using specially developed pull-out test device. The tests conducted on high-strengths woven geotextiles with different thicknesses with both pristine and cement treated interfaces. Cement treatment carried out with 1.5 g/cm2 portland cement sprayed on water saturated geotextile. The results of tests conducted on pristine reinforcements with different thicknesses showed that increasing the thicknesses of the reinforcements increase the pull-out capacity. Also, the cement treatment increases the pull-out capacity of reinforcements. The results of this study show that cement treatment of the interface of soil and reinforcement increases the pull-out capacity of the reinforcement in two different mechanisms by increasing the thicknesses of the reinforcement and creating a rough surface on the reinforcement with higher interface friction angle.
کلیدواژه‌های انگلیسی مقاله خاک مسلح, مقاومت بیرون کشیدگی, ژئوتکستایل, تثبیت سیمانی, فصل مشترک خاک و ژئو تکستایل

نویسندگان مقاله احد اوریا |
هیات علمی /دانشگاه محقق اردبیلی

صباح امامی |
دانشگاه محقق اردبیلی

سعید کرم زادگان |
دانشگاه محقق اردبیلی


نشانی اینترنتی https://ceej.aut.ac.ir/article_3650_f07fb13a93106fc49e692ea222377239.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده fa
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات