Journal of Ultrafine Grained and Nanostructured Materials، جلد ۵۳، شماره ۲، صفحات ۱۳۵-۱۴۵

عنوان فارسی
چکیده فارسی مقاله
کلیدواژه‌های فارسی مقاله

عنوان انگلیسی Wear Behavior of Nanostructured Al-Al3V and Al-(Al3V-Al2O3) Composites Fabricated by Mechanical Alloying and Hot Extrusion
چکیده انگلیسی مقاله The present work was undertaken to characterize the wear behavior of nanostructured Al-Al3V and Al-(Al3V-Al2O3) compositesproduced by milling and hot extrusion. The samples were characterized by pin-on-disk wear test, X-ray diffraction (XRD), and scanning electron microscopy (SEM). Results of wear test showed the nanostructured composites, as compared with the base metal, exhibited higher wear resistance. Dominate wear mechanism of the composites was recognized to be formation of mechanically mixed layer (MML) on the worn surfaces. Comparison of wear behavior of the Al-10 wt. %Al3V and Al-10 wt. %(Al3V-Al2O3) composites showed that Al-10 wt. %Al3V composite at different temperatures and for different loads has less wear rate than the Al-10 wt. %(Al3V-Al2O3) composite due to the weaker bond strength between Al2O3 particles and Aluminum matrix.
کلیدواژه‌های انگلیسی مقاله wear, aluminum, Metal matrix composite, Nanostructured materials, Mechanical alloying, Hot extrusion

نویسندگان مقاله Seyedeh Zahra Anvari |
Department of Mechanical Engineering, Payame Noor University (PNU), Tehran, Iran; Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran.

Mohammad Hossein Enayati |
Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran.

Fathallah Karimzadeh |
Department of Materials Engineering, Isfahan University of Technology, Isfahan, Iran.


نشانی اینترنتی https://jufgnsm.ut.ac.ir/article_79216_2dd7a46155be10286a867a169fb6c42f.pdf
فایل مقاله فایلی برای مقاله ذخیره نشده است
کد مقاله (doi)
زبان مقاله منتشر شده en
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات