مهندسی عمران مدرس، جلد ۱۳، شماره ۳، صفحات ۱۲۳-۱۲۳

عنوان فارسی اثر تیپ‌بندی اعضا روی رفتار لرزه‌ای قاب‌های خمشی بتن‌آرمه
چکیده فارسی مقاله چکیده-از عوامل موثر بر رفتار لرزه‌ای سازه‌ها که طراحی، به آن وابسته است، تیپ‌بندی المان‌های سازه‌ای هنگام آزمایش و طراحی است. تیپ‌بندی که بیشتر به خاطر آسانی اجرا و سادگی کار انجام می‌شود، روی رفتار لرزه‌ای سازه اثر می‌گذارد. در این پژوهش اثر تیپ‌بندی ستون‌های بتن‌ آرمه روی رفتار غیرخطی سازه‌های 4، 8 و 12 طبقه بتن‌آرمه و پاسخ‌های سازه مانند بیشینه تغییر مکان و شاخص‍های خسارت (با تیپ‌بندی و بدون تیپ‌بندی) بررسی شده است تا نتایج مثبت و منفی این تیپ‌بندی‌ها که اکنون در طراحی و اجرای سازه مرسوم است، روشن شود. سازه‌های مورد نظر با رکورد زلزله طبس با شتاب‌های بیشینه (PGA) گوناگون ارزیابی دینامیکی غیرخطی شد و شاخص‌های خسارت برپایه‌ی المان‍ها، طبقات و نیز شاخص‌های کلی خسارت بر پایه‌ی شاخص خسارت Park-Ang-Wen، محاسبه و ارائه شده است. نتایج ارزیابی،گویای کم بودن اثر تیپ‌بندی در PGAهای کمتر از 0.5g بر خسارت کلی سازه است و از روی دیگر نشان می‌دهد که در PGAهای بزرگ‌تر، سازه­های تیپ‌بندی شده دچار خسارت‌های بیشتری می‌شود. تیپ‌بندی المان‌های سازه‌ای باعث تمرکز انرژی و خسارت در المان‌هایی می‌شود که نسبت نیرو به ظرفیت المان (DE/CE) در تراز بالاتری قرار دارد؛ این پدیده باعث ایجاد طبقات نرم در سازه و بیشتر مواقع افزایش خسارت کلی سازه می‌شود.
کلیدواژه‌های فارسی مقاله

عنوان انگلیسی Investigation of Grouping Effect in Seismic Behavior of R. Concrete Frames
چکیده انگلیسی مقاله One of the problems that influence on seismic behavior of structures and associate designing to itself is the grouping of structural element within analyzing and design of structures. Generally this grouping is due to facilitate of performing the structures. This paper investigates these grouping effects on behavior of concrete structures with RC bending frame systems andmoderate ductility scale. Study cases that is used for assessment of these grouping effect contains buildings with 4, 8 and 12 story RC structures. Each of these buildings designed one time without grouping and several times with grouping consideration about columns of structures in the height direction of buildings.Codes that are used for design purposes are Iranian Seismic code and RC structure design code. IDARC program V7.0 is utilized for estimation of damage indices, maximum story drifts or displacements and energy dissipated by building structural systems to comparing thenonlinear seismic behavior of column grouped and non-grouped structures. Damage indices calculated by this program is based on modified Park-Ang-Wen model and represented individually by elements, stories and a total damage index. The selected structures are analyzed with nonlinear dynamic analyzing method under Tabas earthquake record using several peak ground accelerations (0.35g, 0.50g, 0.75g and 0.90g) and pushover analysis with force-control and displacement-control methods. Maximum responses such as maximum displacements, damage indices(with grouping and non-grouping design method) were used to realization result of this designing method.Comparing the result of nonlinear analysis showed increasing of damage with increasing of PGA. This is due to a better distribution of forces in the elements of structures in case of non-grouped designed structures. Analytical results showed that the effect of grouping in PGA less than 0.5g is not sensible, but in larger PGA the grouped designed structures suffer more damages. The grouping of structural elements causes to concentration of energy in elements that their demand to capacity ratio (DE/CE) is greater than others.This causes that these elements embroil more damage and save other element from greater damage.One of the other results of this designing method (Grouping of element) is formation of soft stories in the structure. Also the reason of this behavior is due to lumping of hysteretic energy on these stories. This subject causes to generate soft and weak story in the structure and increase the overall damage indices.Furthermore result of pushover analysis showed that grouped element structures have a more stiffness and so in a weak earthquake (a low PGA) have a less or equal damage index in comparison to non-grouped element structures. As an overall result determined when DE/CE for all elements is close to each other distribution of damage is uniform and vice versa.
کلیدواژه‌های انگلیسی مقاله

نویسندگان مقاله مهدی کریمی |
آزاد واحد سمنان

علی خیرالدین |
دانشگاه سمنان
سازمان اصلی تایید شده: دانشگاه سمنان (Semnan university)


نشانی اینترنتی http://mcej.modares.ac.ir/article_10099_484058984a6ee91ae81b8307b5c88053.pdf
فایل مقاله اشکال در دسترسی به فایل - ./files/site1/rds_journals/1242/article-1242-225540.pdf
کد مقاله (doi)
زبان مقاله منتشر شده fa
موضوعات مقاله منتشر شده
نوع مقاله منتشر شده
برگشت به: صفحه اول پایگاه   |   نسخه مرتبط   |   نشریه مرتبط   |   فهرست نشریات