|
علوم و تکنولوژی پلیمر، جلد ۲۴، شماره ۴، صفحات ۳۰۱-۳۱۶
|
|
|
عنوان فارسی |
شبیه سازی دو راکتور متوالی بستر سیال فاز گازی تولید پلی اتیلن سبک خطی در حالت پایا |
|
چکیده فارسی مقاله |
|
|
کلیدواژههای فارسی مقاله |
|
|
عنوان انگلیسی |
Steady State Simulation of Two-Gas Phase Fluidized Bed Reactors in Series for Producing Linear Low Density Polyethylene |
|
چکیده انگلیسی مقاله |
A linear low density polyethylene (LLDPE) production process, including two- fuidized bed reactors in series (FBRS) and other process equipment, was completely simulated by Aspen Polymer Plus software. Fluidized bed reactors were considered as continuous stirred tank reactors (CSTR consisted of polymer and gas phases). POLY-SRK and NRTL-RK equations of state were used to describe polymer and non-polymer streams, respectively. In this simulation, a kinetic model, based on a double active site heterogeneous Ziegler-Natta catalyst was used for simulation of LLDPE process consisting of two FBRS. Simulator using this model has the capability to predict a number of principal characteristics of LLDPE such as melt fow index (MFI), density, polydispersity index, numerical and weight average molecular weights (Mn,Mw) and copolymer molar fraction (SFRAC). The results of the simulation were compared with industrial plant data and a good agreement was observed between the predicted model and plant data. The simulation results show the relative error of about 0.59% for prediction of polymer mass fow and 2.67% and 0.04% for prediction of product MFI and density, respectively. |
|
کلیدواژههای انگلیسی مقاله |
|
|
نویسندگان مقاله |
علی فرهنگیان کاشانی | farhangian kashani
حسین عابدینی |
محمدرضا کلایی | mohammad reza
|
|
نشانی اینترنتی |
http://jips.ippi.ac.ir/article_577_271.html |
فایل مقاله |
اشکال در دسترسی به فایل - ./files/site1/rds_journals/968/article-968-197274.pdf |
کد مقاله (doi) |
|
زبان مقاله منتشر شده |
fa |
موضوعات مقاله منتشر شده |
|
نوع مقاله منتشر شده |
|
|
|
برگشت به:
صفحه اول پایگاه |
نسخه مرتبط |
نشریه مرتبط |
فهرست نشریات
|